2LK/2LN/2LM/2LC-2
1-3-104
U161 Setting: [Print]
1. Select the item to be set.
2. Change the setting value using the +/- keys.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U163 Resetting the fuser problem data
Description
Resets the detection of a service call code indicating a problem in the fuser section.
Purpose
To prevent accidents due to an abnormally high fuser temperature.
Method
1. Press the start key.
2. Press [Execute].
3. Press the start key. The fuser problem data is initialized.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Item No. Description
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
Full Speed
Print(Center)
Temperature at maximum
print speed (Center)
130 to 200
(Ā°C)
165 170 170 175
Duplex Shift
(Center)
Temperature at duplex
printing (Center)
-20 to 20
(Ā°C)
5555
To Next Page
Loading...
