1.OVERVIEW
Setting up NetWare Print Server 19
1 OVERVIEW
Configuring the queue based connection in the IPX/SPX network
1
In the [Configure Port Handler for Printer Agent] dialog box, select [Forward Jobs to a
Queue] and click [Next].
2
Enter the NDS queue name in the [Queue Name] box and the user name in the [Queue
User Name] box. Then click [Finish].
The [Select Printer Drivers] dialog box appears.
The NDS queue must be created.
3
Select the printer drivers to be installed in the [Printer Drivers] list at each OS tab, and
click [Continue].
The [Information] dialog box appears.
4
Click [OK].
It takes about 60 seconds to complete the creation of the NDPS Printer object.
5
Double-click the NDPS Printer object that you created.
The [NDPS Printer] dialog box appears.
6
Click [NDPS Remote Printer Management].
7
Select the [Install to workstation in this container] and click [Update].
8
Click [OK] to close the [NDPS Printer] dialog box.
To Next Page
Loading...
