2 INSTALLING THE PRINTER DRIVER (Windows)
28 Installing the Printer Driver
7
Select [LPR] at the [Protocol]
option, enter a queue name in
the [Queue Name] box at the
[LPR Settings] option, and
click [OK].
In the [Queue Name] box, you have
to enter a queue name, direct, hold,
or print, on the GA-1310/E printer.
Enter a queue depending on how
you want to print.
print - print jobs are spooled to the
hard disk in the GA-1310/E printer
and printed out. Use this queue for
general printing.
direct - print jobs are sent straight to
the printer without spooling.
hold - print jobs are held until users
operate copying or moving them to
the Print queue with the job manage-
ment tools.
You can also enable the LPR Byte
Counting by selecting the [LPR Byte
Counting Enabled] check box.
You cannot change the order of print
jobs by moving them, which are sent to
the direct queue.
To Next Page
Loading...
