48
Figure 2
a. to use the direct city
water hook-up, all
valves need to be closed.
b. to use water from tank, with pump, valve B is open,
other valves are closed.
c. to pressure fill tank, use “ City Water Hookup “
connection, with valve A open. The other valves are
closed. After water tank is filled, close valve A, open
valve B. Upon demand, then the water pump will
pump water from the tank.
d. to fill or sanitize tank, drawing fluid from siphon line
using water pump, open valve A & C, valve B is
closed.
e. to winterize or sanitize fixtures only thru siphon hose
using the water pump, open valve C, valves A & B
need to be closed.
NOTE: When winterizing unit, hot water heater valve
must be closed to prevent any anti freeze from
entering water heater.
B. Fresh water fill with 4 way valve hookup. This fill is used only on
some Sportsmen models. To use this fill, select desired method
of water supply, with black handle, for tank or normal, which is
the direct water hookup, See figure 3. Attach hose to hookup and
supply line. Open supply line faucet. Figure 3
A = City water hookup
connection.
B = Black handle to
select tank water or direct water.
DO NOT leave tank unattended while filling, as an over filled tank will built
pressure, causing tank to crack, rupture, and leak or even damaging sup-
ports holding it in place.
CAUTION
!
PDF created with pdfFactory trial version www.pdffactory.com
To Next Page
Loading...
