65
1. Knob to open and close main valve.
2. Complete valve assembly.
3. “10% valve“, (small brass knob or
slot screw).
4. Container mounting stand.
ALL PROPANE LINES HAVE
BEEN CHECKED WITH AIR
PRESSURE. DEALERS ARE RE-
QUIRED TO RECHECK BEFORE
DELIVERY TO RETAIL CUSTOM-
ERS.
THIS GAS PIPING SYSTEM IS DESIGNED FOR USE WITH PROPANE ONLY.
DO NOT CONNECT NATURAL GAS TO THIS SYSTEM.
Securely cap inlet when not connected for use. After turning on gas, except
after normal cylinder replacement, test gas piping and connections to appli-
ances for leakage with soapy water or bubble solution. Do not use products
that contain ammonia or chlorine.
CAUTION
!
D DAN AWARNING
!
Never smoke during the filling of propane tanks. Keep the recreational
vehicle away from immediate filling area when possible or extinguish
all propane appliances.
PDF created with pdfFactory trial version www.pdffactory.com
To Next Page
Loading...
