L-Acoustics LA4X - Avb; Speaker

Installation
AVB
• LA4X amplied controllers with HARDWARE INFO ID1, ID2 or ID3 (in MONITORING & INFO menu) do not
support AVB. These Units can be upgraded to support AVB by purchasing and installing KR LA4XDSP2.
• LA4X amplied controllers with HARDWARE INFO ID4 or higher (in MONITORING & INFO menu) support AVB.
To connect LA4X to an AVB network or use LA4X to create an AVB network, use the etherCON connectors on the rear
panel.
Refer to the LA Network Manager Help for more information on how to connect LA4X to the AVB network in daisy-chain,
star or hybrid topologies.
Speaker
To connect an enclosure to the amplied controller, use the speakON connectors.
For cabling schemes, refer to the Amplication reference technical bulletin.
For the enclosure drive capacity per amplied controller, refer to the Amplication reference technical bulletin or
Preset guide.
26 LA4X owner's manual (EN) version 14.1