Operation
Meters
The four LED meters (six LEDs each) display the state of the corresponding output channel.
LIMIT/CLIP
orange: the L-DRIVE limiter is activated with gain reduction of at least 3 dB
red: the output voltage reaches the maximum level (signal clip)
-5dB
-10dB
-20dB
green: the output voltage reaches 5, 10 or 20 dB below the maximum level
SIGNAL green: a signal is detected and the output voltage reaches 0.1 V
LOAD green: a load is connected and the output module delivers a minimum of 0.8 A
OUT
The four OUT LEDs on the front panel display the mute status.
• white: when the corresponding output channel is muted
• off: when the corresponding output channel is unmuted
LA4X owner's manual (EN) version 14.1 29
To Next Page
Loading...
