L-Acoustics LA4X - Monitoring & Info; SPK HANDLING (%)

Operation
MONITORING & INFO
The MONITORING & INFO menu provides real-time measurements and information on the amplied controller:
• For each output channel:
• real-time RMS output voltage (in percentage of the maximum value supported by the connected transducer
section)
• output temperature (in percentage of the operating range)
• Ethernet ports and AVB clock current status.
• Version numbers of the amplied controller onboard rmware and preset library.
• Amplied controller's MAC address and hardware version.
• The ENCLOSURE CHECK function.
‽MONITORING & INFO ‼※
OPTIONS
OK
‾SPK HANDLING (%) ‼
12% 10% 13% 11%
‽OUT CH TEMP (%) ‼
52% 53% 50% 48%
‽ETHERNET LINKS ‼
1: 1G FULL 2:100 FULL
‽AVB CLOCK STATUS ‼
DISABLED
‽FIRMWARE ‼
V2.8.1
‽PRESET LIBRARY ‼
V5.8
‽MAC ADDRESS ‼
00:1B:92:01:90:3A
‽HARDWARE INFO ‼
ID4
‿ENCLOSURE CHECK ‼
PRESS OK TO START
SPK HANDLING (%)
SPK HANDLING (%) (speaker handling) displays the RMS voltage measured at each individual amplier circuit output as
a percentage of the maximum voltage supported by the connected speaker section.
‾SPK HANDLING (%) ‼
12% 10% 13% 11%
For example in this illustration, the RMS voltage of channels OUT 1 to OUT 4 is respectively 12, 10, 13, and 11% of the
maximum values.
LA4X owner's manual (EN) version 14.1 49