L-ACOUSTICS V-DOSC Manual Version 4 6/29/2005 Page 24 of 158
RIGGING ACCESSORIES
(5) BUMP2
Flying bumper for rigging a V-DOSC array up to 16 enclosures deep. Can also be inverted and
used as an adjustable base for stacking a V-DOSC array
(6) BUMPDELTA
Delta plate used to attach two motors to BUMP2, allowing for pan adjustment of a flown V-
DOSC array
(7) ANGLE STRAPS
Used to provide spacing between V-DOSC enclosures when stacked or flown. Values: 0.75° or
5.5°; 1.3°; 2°; 3°; 4° (Part Codes: BUMP24; BUMP251; BUMP25; BUMP26; BUMP27)
(8) SPACER
Used with ANGLE STRAPS to provide the desired spacing between V-DOSC enclosures when
stacked or flown (Part Codes; SPAC251=1.3°; SPAC25=2°; SPAC26=3°; SPAC27=4°;
SPAC28 =5.5° for use with corresponding BUMPxx)
(9) CHARIOT
Transportation chariot for 2 x BUMP2, 2 x BUMPSUB, ANGLE straps, ratchet straps,
screwjacks, shackles and other rigging accessories
(10) dV-BUMP
Flying bumper for rigging dV-DOSC and/or dV-SUB. When combined with V-DOSC BUMP2,
can be used for rigging dV-DOSC on top of V-DOSC or for stacking dV-DOSC.
(11) dV-DOWN
Pair of rigging adapters for installing dV-DOSC underneath V-DOSC for down-fill applications
BUMP2
ANGLE STRAPS
BUMPDELTA
SPACER
To Next Page
Loading...
