To Next PageTo Next Page
Need help?Do you have a question about the L3 Communications MX-15i and is the answer not in the manual?
General| Type | Electro-Optical/Infrared (EO/IR) Imaging System |
|---|---|
| Category | Security System |
| Sensors | Daylight camera, Infrared camera, Laser rangefinder |
| Sensor Type | Multi-sensor |
| Power Requirements | 28 VDC |
| Operational Temperature | -40°C to +55°C |
| Power Supply | 28 VDC |
| Manufacturer | L3Harris Technologies |
| Typical Applications | Surveillance, Reconnaissance |
| Dimensions | Varies with configuration |
| Field of View | Wide and narrow fields of view |
| Video Output | NTSC, PAL |
| Camera Resolution | HD resolution |
| Connectivity | Ethernet, RS-422 |
Lists crucial warnings about personnel safety, heavy items, and danger zones.
Details cautions for cleaning, solvents, gas handling, and desiccant material.
Covers warnings for desiccant material contact and handling procedures.
Describes the main components and overall system architecture, including power and communications.
Provides detailed specifications for the Turret, Hand Controller, and GPS Antenna.
Details the primary and secondary controls of the hand controller for system operation.
Explains graphical overlays providing user feedback on video displays.
Explains the three-level hierarchy for accessing system status and controls.
Details the main menu for reviewing operational status and accessing submenus.
Provides status and controls for environmental and positional gimbal parameters.
Covers status and controls for the Electro-Optic Wide (EOW) imaging sensor.
Details status and controls for the Infrared (IR) sensor, including calibration.
Provides status and controls for the Electro-Optic Narrow (EON) sensor.
Manages video inputs and outputs, including overlay configuration.
Controls turret movement sensitivity and automated steering patterns.
Configures sensitivity of zoom, focus, and filter controls for cameras.
Configures mission data like date, time, and units of measure.
Controls the display of various overlay components on the video feed.
Allows saving, retrieving, and restoring system configuration profiles.
Outlines tasks for pre-flight, in-flight, and post-flight operations.
Describes the main structural components: Lid, Yoke, and Gimbal.
Details the EOW, EON, and IR sensors mounted on the optical bench.
Explains features for protection against environmental factors like moisture.
Details software functions like operator control interpretation and geo-location.
Details the protective aluminum cases for transportation and storage.
Explains how to assemble and use the service stand for maintenance.
Covers the three steps for installing the turret into an aircraft.
Outlines procedures for removing the turret from the aircraft.
Details the process of connecting and powering the hand controller.
Explains Built-in Tests (BIT) for checking component operational states.
Provides a reference for BIT error codes and recommended actions.
Guides users through fault isolation using diagnostic trees for power/video failures.
Outlines L-3 Wescam's repair policy and approved maintenance procedures.
Details procedures for inspecting and cleaning turret windows, including environmental factors.
Explains the procedure to maintain a dry internal environment using nitrogen.
Provides instructions for replacing the Schrader purge valve in the rear door.
Details the process of removing, replacing, or refilling the desiccant assembly.
Outlines the process for returning LRUs for repair or service.
