EasyManua.ls Logo

L3 Communications MX-15i - Specific Environmental and Material Handling

Default Icon
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TM00358 Rev. A Warnings & Cautions
L-3 WESCAM October 2007
All Rights Reserved v
WARNING: AVOID DESICCANT MATERIAL CONTACT WITH SKIN, INGESTION OR INHALATION OF DUST.
WHEN FIRST EXPOSED TO WATER, THE DESICCANT MATERIAL BECOMES VERY HOT.
Caution: Make sure no water enters the desiccant enclosure during desiccant exchange.
Caution: Remove the breather valve while it is facing upwards so desiccant material does not spill out.
Caution: Do not over fill or pack the desiccant material. Room must be left for the filler port to seat
properly.
Caution: Store and pack the turret by following the procedures defined in Chapter 4 of this manual.
When shipping items, it is the customer's responsibility to correctly pack and obtain insurance.
L-3 Wescam is not liable for any damage that occurs during shipment.
Caution: Use anti-static, Electrostatic Discharge (ESD), pink bubble wrap only. For all self pack LRUs,
use safe ESD bubble wrap to protect electrical components during shipment.

Table of Contents