B-1
A PPENDIX
B
C
HAPTER
0
BARCODE LOCATIONS
The Labcyte Echo liquid handler optionally includes one or more barcode
scanners. The location of each scanner depends on the location of your
barcode labels on the microplates.
Note: You can use either the front scanner or the side scanner, but
not both.
The load registration pins on the source and destination microplate
assemblies obstruct the barcode scanners from seeing all of a microplate’s
front and side surfaces.
The obstructed areas are different depending on the microplate’s flange
height. Refer to the ANSI/SBS 3-2004 Bottom Outside Flange Dimensions
specification for additional information.
To Next Page
Loading...
