Echo Liquid Handler Software 5-17
5.1.3 Remove an existing protocol definition
If a protocol must be deleted, select the protocol name and click the
REMOVE button. Confirmation of the removal is required. The protocol
definition is deleted from the Echo database and from the Echo software
PROTOCOL LIST.
5.1.4 Run a protocol
To run a liquid transfer protocol:
1. From the PROTOCOLS window, select the protocol to be run and click the
RUN button. The first of a series of screens is displayed to provide
instructions to run the selected protocol.
Figure 5.23 Protocol selected to be run
To Next Page
Loading...
