5-18 Echo Liquid Handler User Manual
2. Click the N
EXT button. The process door will open and the source plate
gripper stage will extend outside of the Echo liquid handler.
3. Load your source microplate with well A1 in the inner-left corner. Click
the NEXT button.
The source plate gripper stage retracts into the Echo liquid handler and
the destination plate gripper stage is extended outside of the Echo liquid
handler.
4. Load your destination microplate with well A1 in the inner-left corner.
Click the N
EXT button.
While the destination plate gripper stage retracts the microplate, the
source microplate is surveyed. The Echo liquid handler determines the
fluid composition and well fluid thickness, and then calculates the fluid
volume in each well.
To Next Page
Loading...
