EasyManuals Logo

Labrie automizer Operator's Manual

Labrie automizer
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
Safety 21
4. Release the safety prop using the safety prop handle and position it adequately.
Figure 2-2
Safety prop handle
5. Lower the body until it rests on the safety prop.
6. Lock out and tag out the vehicle (see Locking Out and Taging Out the Vehicle on page 27).
You can now work safely underneath the body.
Putting the Body Safety Prop Back in Place
To put the body safety prop back in place:
1. Make sure that there is enough clearance above the body to raise it safely.
2. Start the engine.
3. Raise the body until the safety prop can move freely.
4. Put the safety prop back in its place.
5. Lower the body.
Tailgate Safety Prop
The tailgate safety prop is used to support and keep the tailgate open during inspection or
maintenance procedures. It is mandatory to set the safety prop every time the tailgate is open for such
purposes.
IMPORTANT: Make sure that the body is empty before installing safety props.

Table of Contents

Other manuals for Labrie automizer

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Labrie automizer and is the answer not in the manual?

Labrie automizer Specifications

General IconGeneral
BrandLabrie
Modelautomizer
CategoryAutomobile
LanguageEnglish

Related product manuals