Controls and Indicators 39
Speed-up Control Switch
In auto-neutral mode, this switch enables the engine to run at a predetermined rpm.
Figure 3-14
Speed-up switch
Multi-Cycle Control Switch
This function allows the packer to cycle a preset number of cycles (from 2 to 8, 3 being the standard)
by pressing the green button once. Cycles can be stopped anytime by pressing the red button or
turning off the multi-cycle control switch. When turning off the multi-cycle control switch, the packer
completes the ongoing cycle in order to get back to the fully retracted position, and then stops.
Figure 3-15
Multi-cycle switch
To Next Page
