4
Operating the
A
UTOMIZER
TM
RECYCLER
The different methods, procedures and necessary
actions to operate the A
UTOMIZER
TM
RECYCLER are
presented in this section.
Before operating the A
UTOMIZER
TM
RECYCLER, the
operator must be completely familiar with all safety
procedures, and the location, operation and functions
of all controls and indicators related to the operation of
the unit.
You must complete the daily inspection before starting
the vehicle. It is your responsibility to report any
malfunctions or concerns to your supervisor and
maintenance department.
Consult with your supervisor for specific rules of
driving the A
UTOMIZER
TM
RECYCLER.
Obey all speed restrictions and regulations.
Daily Inspection
Approaching the Vehicle
As you approach, look for any object under or against
the vehicle and check the surroundings for people,
other vehicles, under and overhead obstructions.
Ensure that the truck is parked at the most convenient
place where you will have all the clearance required to
perform a complete start-of-the-day inspection.
During the daily inspection, look for any structural
damage. Inspect tires and check the hydraulic tank for
air leaks.
Warning!
Always read and understand the
Operator Manual before operating the
equipment.