Labrie automizer Operator's Manual

1
Introduction
The purpose of this manual is to introduce operators
to the operational procedures for the A
UTOMIZER
TM
RECYCLER. For information regarding maintenance
procedures, refer to the maintenance manual for the
A
UTOMIZER
TM
RECYCLER.
Introducing the AUTOMIZER
TM
RECYCLER
The AUTOMIZER
TM
RECYCLER is a straight-frame, side-
loading vehicle, manufactured to the highest
standards, and designed to collect recycling materials.
The A
UTOMIZER
TM
RECYCLER is a modified version of
the Labrie A
UTOMIZER
TM
. It was modified to be
equipped with a 6-cubic-yard hopper bucket for
recycling material collection.
Located on the left-hand side of the vehicle, the
hopper bucket can be unloaded into the hopper, lifted
by two (2) hydraulic cylinders attached to the side of
the hopper. The hopper bucket is operated by a
control lever mounted on a swivel arm that can be
unfolded to facilitate safe operation of the bucket.
This unit is also equipped with two (2) crusher panels
that allow the operator to break the load inside the
hopper, preventing heavy cardboard to bridge over the
packer.
The A
UTOMIZER
TM
RECYCLER also provides hydraulic
power to the recycling containers using two (2)
hydraulic hoses rolled along the hopper. These hoses
are made to be connected to hydraulic containers that
empty into the hopper bucket..
Warning!
The AUTOMIZER
TM
RECYCLER units must be
operated by only one person.

Labrie automizer Specifications

General

Brand	Labrie
Model	automizer
Category	Automobile
Language	English