24 Safety
Figure 2-6
Raising the tailgate safety prop
5. Release your grip on the safety prop to set it in its home position.
Figure 2-7
Setting the safety prop in its home position
6. With the tailgate control lever on the cab control panel, completely close the tailgate.
The
TAILGATE OPEN light indicator should turn off.
7. Put the safety pin back in place.
Camera System
AUTOMIZER
TM
RECYCLER units are equipped with two cameras, one inside the hopper (see Figure
2-8), the other on the tailgate (see Figure 2-9).
The operator can switch from one camera to the other thanks to a selector switch located on the 7”
LCD colour monitor installed in the cab.
To Next Page
Loading...
Need help?
General
