Controls and Indicators 37
Strobe Light Switch
This switch activates and deactivates the strobe light mounted on the tailgate.
Shift the switch up to turn on the strobe light.
Shift the switch down to turn off the strobe light.
Figure 3-10
Strobe light switch (left); strobe light (right)
IMPORTANT: Always turn on the strobe light when the vehicle is in working mode.
Packer Control Station (inside Cab)
The AUTOMIZER
TM
RECYCLER has a packer control station located next to the cab console. Here is a
description of all the controls and buttons found on the packer control station.
Stop Push Button (red)
The Emergency Stop button will stop all hydraulic functions on the truck (tailgate, hopper bucket
etc.). By pressing the red button, the packer and the bucket will stop where they are. The red button
has to be manually pulled back to reactivate the hydraulic system.
Figure 3-11
Stop Push Button