Controls and Indicators 41
Crusher Panel Levers
The AUTOMIZER
TM
RECYCLER has two levers that control both crusher panels. These levers are
located on the body near the place where the swivel arm is fixed to the body. The left-hand lever
controls the front crusher panel while the right-hand lever controls the rear crusher panel.
Figure 3-17
Crusher panel levers
Swivel Arm-Mounted Levers
Two levers are mounted on the swivel arm. These levers are used to operate both the container
(right-hand lever) and the hopper bucket (left-hand lever).
Figure 3-18
Levers on the swivel arm