LaCie 12big Rack Storage Server - PCI Slots Configuration Sub-Menu; Remote Access Configuration Sub-Menu

LaCie 12big Rack Storage Server
User Manual page 41
BIOS Settings
6.3.7. PCI Slots Configuration Sub-Menu
Table 34 - PCI Slots Configuration Sub-Menu
Feature Options Description Setup Help
Expansion ROM on PCI Slot 1 ✦ Enabled
✦ Disabled
Enabled: Loads Expansion
ROM on PCI Slot. Disabled:
Expansion ROM on PCI Slot
not loaded.
Expansion ROM on PCI Slot 2
Expansion ROM on PCI Slot 3
Expansion ROM on PCI Slot 4
Expansion ROM on PCI Slot 5
Expansion ROM on PCI Slot 6
Expansion ROM on PCI Slot 7
6.3.8. Remote Access Configuration Sub-Menu
Table 35 - Remote Access Configuration Sub-Menu
Feature Options Description Setup Help
Remote Access ✦ Enabled
✦ Disabled
Configures console redirection. Disabling remote ac-
cess will hide all related features in this sub-menu.
Serial port number
✦ COM1
✦ COM2
Configures serial port for console redirection. Also
used for Headless operation mode through ACPI.
Make sure the selected port is
enabled.
Base Address, IRQ IO, IRQ Displays the hardware address of the COM port used
for the console.
Serial Port Mode
✦ 115200 8,n,1
✦ 57600 8,n,1
✦ 38400 8,n,1
✦ 19200 8,n,1
✦ 09600 8,n,1
Configures the serial Baud rate for the serial ports.
8 data bits, no parity and 1 stop bit parameters are
fixed.
Flow Control
✦ Hardware
✦ Software
✦ None
Configures flow control for console redirection for
both serial ports.
Redirection After BIOS POST
✦ Disabled
✦ Boot loader
✦ Always
Selects how the serial redirection done by the BIOS
will operate after the POST.
Disable: Turns off the redirec-
tion after POST Boot Loader:
Redirection is active during
POST and during Boot Load-
er. Always: Redirection is al-
ways active. (Some OSs may
not work if set to Always) [En-
abled] - keep it [Disabled]-
deactivate