LaCie 12big Rack Storage Server - Exit Menu; BOOT Menu POP-UP

LaCie 12big Rack Storage Server
User Manual page 52
BIOS Settings
Feature Options Description Setup Help
Product Version Number Manufacturer
PCB version
Displays the CPU blade PCB revision number.
Product Serial Number Varies Displays the CPU blade serial number.
6.7. Exit Menu
Table 60 - Exit Menu
Feature Options Description Setup Help
Save Changes and Exit Enter Saves modified settings into non-volatile memory and
reboots the system.
Exit system setup after saving
the changes. F10 key can be
used for this operation.
Discard Changes and Exit Enter Discards modifications to settings and reverts to the
state when Setup was entered, then complete remain-
ing POST.
Exit system setup without sav-
ing any changes. ESC key can
be used for this operation.
Discard Changes Enter Discards modifications to settings and reverts to the
state when Setup was entered.
Discards changes done so far
to any of the setup questions.
F7 key can be used for this
operation.
Load Optimal Defaults Enter Loads the factory default settings. Loads Optimal Default values
for all the setup questions. F9
key can be used for this op-
eration.
6.8. BOOT Menu POP-UP
Boot Menu POP-UP is a boot screen that displays a selection of boot
devices from which you can boot your operating system.
Pressing <F11> (or <F3> from a Console Redirection terminal)
displays the Boot Menu POP-UP with these options:
1. Load the operating system from a boot device of your choice.
2. Exit the Boot Menu POP-UP (with <ESC>) and load the operat-
ing system from the boot devices in the order specified in Setup.
The BOOT Menu POP-UP expands your boot options by letting you
choose your boot device, which could be a hard disk, floppy disk,
CDROM, Flash Disk, SCSI or LAN. You can select your boot device
in Setup, or you can choose a different device each time you boot
during POST by selecting your boot device in the Boot menu POP-
UP.