LaCie 12big Rack Storage Server
User Manual page 8
Safety Guidelines
Fig. 02 - Warning Label – Earthed Mains Socket
Provide a suitable power source with electrical overload protection
to meet the requirements laid down in the technical specification.
Bifurcated power cords MUST NOT be used with the 12big Rack
Storage Server – they are not supported.
Hot surfaces (heatsinks) are exposed when the enclosure top cover is
removed. Disconnect power and allow the enclosure to cool before
working inside the system.
Fig. 03 - SAS Expander Cover Warning Label
Rotating fan blades are exposed when the enclosure top cover is
removed.
Fig. 04 - Fan Caution Label
When pulled out from the rack, the enclosure must not be used as a
shelf to support any other object.
Fig. 05 - Shelf Caution Label
CAUTION: Do not remove covers from the PSU: there is a danger
of electric shock inside. Return faulty PSUs to LaCie for repair.
1.2.1. Battery Precautions
CAUTION: There is a danger of explosion if the battery is replaced
by an incorrect type.
Dispose of used batteries in accordance with the manufacturer’s
instructions and national regulations. Equipment Handling Precau-
tions
IMPORTANT INFO: Operation of the enclosure with ANY drive
carrier modules missing will disrupt the airflow and the system will
not receive sufficient cooling. It is ESSENTIAL that all apertures are
filled before operating the unit. Dummy drive carrier modules must
be fitted to unused drive bays.
To Next Page
