Lantronix XPress DR - Interface Mode Options

F: Binary to Hex Conversion
XPress™ DR Industrial Device Server User Guide 105
SERIAL TO NETWORK
Clear input buffer upon:
NETWORK TO SERIAL
Clear output buffer upon:
Alternate Packing Algorithm Hex
Passive connection
Disconnect
Active connection
Passive connection
Disconnect
Enable
E7
Active connection
Passive connection
Disconnect
Active connection
Passive connection
Disconnect
Enable
F7
Interface Mode Options
Table F-6 Interface Mode Options
Interface Bits Parity Stop Bits Hex
RS-232C 7 No 1 48
RS-232C 7 No 2 C8
RS-232C 7 Even 1 78
RS-232C 7 Even 2 F8
RS-232C 7 Odd 1 58
RS-232C 7 Odd 2 D8
RS-232C 8 No 1 4C
RS-232C 8 No 2 CC
RS-232C 8 Even 1 7C
RS-232C 8 Even 2 FC
RS-232C 8 Odd 1 5C
RS-232C 8 Odd 2 DC
RS-422/485 7 No 1 49
RS-422/485 7 No 2 C9
RS-422/485 7 Even 1 79
RS-422/485 7 Even 2 F9
RS-422/485 7 Odd 1 59
RS-422/485 7 Odd 2 D9
RS-422/485 8 No 1 4D
RS-422/485 8 No 2 CD
RS-422/485 8 Even 1 7D
RS-422/485 8 Even 2 FD
RS-422/485 8 Odd 1 5D
RS-422/485 8 Odd 2 DD
RS-422/485 2-Wire 7 No 1 4B
RS-422/485 2-Wire 7 No 2 CB
RS-422/485 2-Wire 7 Even 1 7B
RS-422/485 2-Wire 7 Even 2 FB
RS-422/485 2-Wire 7 Odd 1 5B
RS-422/485 2-Wire 7 Odd 2 DB
RS-422/485 2-Wire 8 No 1 4F