Lantronix XPress DR - Apply Settings; Apply Defaults; Figure 5-2 Apply Settings and Apply Defaults

5: Configuration Using Web Manager
XPress™ DR Industrial Device Server User Guide 29
Apply Settings
1. To save and apply the configuration changes to the device server, click Apply Settings.
Note: Clicking OK on each page does not change the configuration on the device. Clicking the
OK button tells the XPress DR device server what changes to use; the Apply Settings button
makes the changes permanent and reboots the XPress DR unit.
Apply Defaults
1. Click Apply Defaults to set the device server back to the default settings.
2. Click Yes to set factory settings, or click No to cancel.
Figure 5-2 Apply Settings and Apply Defaults