XPress™ DR Industrial Device Server User Guide 11
1: Using this Guide
Purpose and Audience
This user guide describes the family of Lantronix® XPress™ DR device servers, including the
XPress DR device server and the XPress DR-IAP device server with support for Industrial
Automation Protocols (IAP).
Most of the material in this manual applies to all of the XPress DR products. However, in some
cases there will be some features that apply to only one product. In those cases, a note will
explain the variation.
Note: In most cases XPress DR refers to both the XPress DR and the XPress DR-IAP industrial
device servers.
Chapter Summary
2: Introduction
Describes the main features of the XPress DR device server and the
protocols supported.
3: Installation of the XPress
DR Device Server
Provides information for installing your unit and getting it up and running
using DeviceInstaller or a serial port connection.
4: Using DeviceInstaller
Instructions for viewing the current configuration using DeviceInstaller
application.
5: Configuration Using Web
Manager
Details using the Web-Manager to set parameters such as port and server
properties.
6: Configuration via Telnet
or Serial Port (Setup Mode)
Provides instructions for accessing Setup Mode (command line interface)
using a Telnet connection through the network or a terminal or terminal
emulation program through the serial port.
Configuration
Details the network (server) settings
Configuration
Details the serial port settings.
Settings
Details expert and security settings and explains how to reset the unit to
factory default values.
Provides instructions for obtaining the latest firmware and updating the
XPress DR.
Provides instructions for accessing and using the command line interface to
monitor the network and diagnose problems.
12: Com Port Redirector
Provides an introduction to the Com Port Redirector and where to download
the software online.
A: Troubleshooting &
Technical Support
Describes common problems and error messages and how to contact
Lantronix Technical Support.