LT-3100 User & Installation Manual Rev. 1.06 Web server
Lars Thrane A/S www.thrane.eu Page 109 of 155
Network
The LT-3100 system is supporting the most common network configurations for Local Area Network (LAN).
The LT-3100 system has one Ethernet (RJ45) interface, which is described in Ethernet RJ45 (LAN) on page
30.
The following network configuration modes will be described in this section:
• DHCP client
• DHCP server
• Static
The default network configuration mode for the Ethernet interface is DHCP client.
NOTE: In DHCP client mode, Link-local is supported, in order to connect another ‘passive’ IP-device
(e.g. a PC) directly to the LT-3110 Control Unit. Expect the LT-3110 Control Unit to get the
IP-address: 169.254.1.1.
NOTE: The IP-address of the LT-3110 Control Unit is always displayed in the UI (MENU -> System ->
Network), see details in System on page 88
To Next Page
Loading...
