Lars Thrane LT-3100 - Page 73

LT-3100 User & Installation Manual Rev. 1.06 System Services
Lars Thrane A/S www.thrane.eu Page 62 of 155
Press the soft key ‘Send’ when the destination address and body text have been completed. The SMS
service will indicate the transmitting status, which will change from ‘Sending’ to ‘Sent’ when the SMS has
successfully been sent from the LT-3100 system, see Figure 71 and Figure 72.
Figure 69: Sending SMS (4 of 7)
Figure 70: Sending SMS (5 of 7)
Figure 71: Sending SMS (6 of 7)
Figure 72: Sending SMS (7 of 7)
Write the SMS text.
When the SMS is ready to
be sent use the soft key
‘Send’.
The SMS will change
status from Sending to
Sent when the SMS has
successfully been sent.
The SMS has successfully
been sent. Otherwise,
retry option is available.