LARSON Bass - Mooring

OPERATING THE BOAT
SECTION
7
© 2003-2018 Ken Cook Co. 7 - 18 l Bass
• Leave some slack in the lines to allow for wave movement or tidal action if
applicable.
MOORING
Because mooring configurations vary, consult with other experienced boaters or
the boat dealer for recommendations on properly mooring the boat. Always moor
the boat securely to prevent personal injury or property damage.
Helpful guidelines when mooring:
• Each mooring line must be of the appropriate strength, material and type
to safely secure your boat when moored.
• Each mooring line must be longer than the length of the boat.
• Use bow and stern mooring lines, as well as spring lines, for additional
security.
• Use fenders to protect the boat from damage.
• When possible, tie up with the bow facing into the wind or current.
• Never attach a mooring line to a point or part of your boat that is not
designed to withstand the stress and the weight of the boat.
• Only use the bow eye, stern eyes and other cleats or attachment points
that have been approved for mooring.
• If you plan on mooring the boat for a long period of time, use chafing
protectors on lines to protect the boat’s finish.
KC-0121C-A
WIND or CURRENT WIND or CURRENT