LARSON Bass - Gauges; Instruments; Multi-Gauges; Tachometer

BOAT FEATURES AND OPTIONS
SECTION
9
© 2003-2018 Ken Cook Co. 9 - 10 l Bass
GAUGES / INSTRUMENTS
The following basic and typical information may not apply to your specific boat.
This section may not cover all gauges on the boat. See the Engine Operator’s
Manual or equipment manufacturer’s supplied information on the use and operation
of the unique gauges and instruments.
Gauges are visual indicators that help you monitor various system and component
operation parameters. Gauges usually have lights integrated into them for visual
clarity when operating at night. They are located near the helm area or other main
control areas.
MULTI-GAUGES
The boat may be equipped with one or more multi-
gauges that combine an analog look with digital display
of specific data such as fuel management/economy, trip
logs and GPS and is speed-selectable with the touch of
a button. Some multi-gauges allow boaters to customize
the type of information and how it is displayed. These
gauges communicate digitally over an NMEA 2K or
CANBUS network and replace mechanical gauges,
sensors and wires. Most units support multiple
propulsion units and share data with other operation
stations. Refer to the Gauge and Propulsion
Manufacturer’s Owner’s Manual for more information.
TACHOMETER
The tachometer indicates engine speed in revolutions per
minute (rpm). Monitor engine rpm at all times to keep the
engine within the proper rpm operating range. See the
Engine Operator’s Manual for the rpm operating range of
your engine.
2
r/min
KC-6000
x1000
F
FUEL LEVEL
MODE
N
R
0
1
3
4
6
7
5
0
5
10
15
20
25
30
40
35
RPM
x 100
KC-0095-A