LARSON Bass - Engine Hour Meter; Oil Level Gauge (Outboard Engine Oil Injection Optional); Water Depth Gauge; Compass

BOAT FEATURES AND OPTIONS
© 2003-2018 Ken Cook Co.
SECTION
9
Bass l 9 - 13
ENGINE HOUR METER
The engine hour meter indicates the total number of
hours the ignition switch is in the ON position. Under
normal conditions, the engine is running when the ignition
switch is ON; therefore, the hour meter provides an
approximate indication of engine hours. An hour meter is
useful in determining scheduled maintenance.
OIL LEVEL GAUGE (OUTBOARD ENGINE OIL INJECTION OPTIONAL)
The oil level gauge indicates the level of outboard engine oil in the reservoir used for
the oil injection system. Some oil injection systems may provide an indicator on the
reservoir. See the Engine Operator’s Manual for additional information.
WATER DEPTH GAUGE
The water depth gauge indicates the approximate distance between the bottom of
the boat and the earth’s surface directly below the transducer. To avoid running
aground in shallow water, always add extra distance to meter readings. See the
manufacturer’s instructions for installation requirements and operating instructions.
COMPASS
A compass assists in navigation by indicating where
approximate north is located. See the manufacturer’s
instructions for operating instructions.
ENGINE WARNING ALARM SYSTEM
The engine may have integrated audible alarms to warn of
engine overheating, low oil pressure or other conditions.
See the Engine Operator’s Manual for more information.
0 000000h
ENGINE
HOURS
Quartz
100
KC-0106-A
KC-0107-A