20
LAUNCH
X-431 PADII
User's Manual
After selecting the desired items, tap “Confirm” to enter the data
stream reading page.
Fig. 5-18
On data stream reading page, the following operations can be done:
If more than one page of data stream items is displayed, an icon
similar to
appears. Swipe the screen from right to left to switch
to the next page.
Vehicle Selection: Tap to return to the vehicle selection screen.
Graphic: After selecting, tap it to view the waveform. Refer to Fig.
5-19.
Record: Tap to start recording diagnostic data for future playback
and analysis. The saved file follows the naming rule: It begins with
vehicle type, and then the record starting time and ends with .x431 (To
differentiate between les, please congure the accurate system time).
The le is stored in “My Report” under “Prole” menu. For details on
playback operations, please refer to Chapter 5.8.4 “My Report”.
To stop reading the data stream, tap “Stop recording” button (the blank
box next to recording progress bar).
Print: Tap to print the content of current screen. An additional Wi-Fi
printer is required.
Help: Tap to view the help information.
Fig. 5-19
Combine:
Tap to display the selected waveform in combined form.
Please note that different items are highlighted in different colors.
Value: Tap to display the waveform in character form.
Record: Tap to start recording the running diagnostic data.
Tap
to return to the function selection screen.
5.6.4 Special Function
This option allows you to detect whether the system parameters are
normal or not. It mainly includes: Injector test, fuel pump test, purge
control solenoid and so on.
Take “1# injector” as an example.
To detect whether 1# injector works normally or not, tap “1# injector”,
the system will automatically carry out the function. After complete, a
prompt dialog box will pop up on the screen.
5.7 golo
This option aims to help repair shops or departments establish long-
To Next Page
Loading...
