14
LAUNCH
X-431 PADII
User's Manual
Fig. 5-4
5.4 User Registration & Connector Activation
5.4.1 User registration
Tap the icon on the desktop to launch the application, and then tap
“Login” to enter the login interface of diagnosis software, as indicated
in Fig. 5-5.
Fig. 5-3
5.2 Bluetooth Setting
Enter X-431 PADII Bluetooth setting screen (“Settings” --> “WIRELESS
& NETWORK” --> “Bluetooth”), slide the Bluetooth switch to ON and
X-431 PADII will start searching available Bluetooth device, tap the
desired connector to pair and match.
By default, the Bluetooth name is 98429*****00 (where ***** stands for
5 digits.).
Note: In case no Bluetooth setting is done before diagnostic
software is launched, you can also configure it while using the
software. For details on Bluetooth connection, please refer to “Chapter
5.6 Start diagnosing”.
5.3 Diagnosis Flowchart
For new users, please follow the operation chart shown in Fig. 5-4 to
get familiar with and start using X-431 PADII.
To Next Page
Loading...
