14–10
CURSORS/MEASURE & Parameters
CHANGE PARAM Parameters can be customized to meet specific needs:
On line
To select for modification up to five different parameters, “1”, “2”,
“3”, “4”, or “5”.
Category
To specify the category or type of parameter.
MORE ∆t@lv SETUP
Calls up the”∆t@lv” customization menu (next page).
measure
Set at ∆t@lv.
source
Using the menu button, selects the channel — “1”, “2” (“3” or “4”) —
or memory (“A”, “B”, “C”, or “D”). While the knob selects “from”
which and “to” which channel the measurement is to be made.
To Next Page
Loading...
