LeCroy 9410 - Page 126

System Commands
|
|
DISPLAY
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
Response format
EXAMPLE (GPIB)
RELATED COMMANDS
PERSIST, PERS
Command/Query
The PERSIST command enables or disables the persistence dis-
play mode.
PERSist <mode>
<mode> := {ON, OFF}
PERSist?
PERSist <mode>
The following code turns the persistence display ON.
CMD$="PERS ON": CALL IBWRT(SCOPE%,CMD$)
PERSIST_SETUP, XY_DISPLAY
120