1
1
1
System Commands 5
ACQUISITION
ATTENUATION, ATTN
Command/Query
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
Response format
EXAMPLE (GPIB)
The ATTENUATION command selects the vertical attenuation
factor of the probe. Values of 1, 10, 100, 1000 or 10000 may be
specified.
The A’Iq’ENUATION? query returns the attenuation factor of the
specified channel.
<channel>:ATTeNuation
<attenuation>
<channel> := {C1, C2, C3~, C4~}
<attenuation>:= {1, 10, 100, 1000, 10000}
<channel>:ATTeNuation?
<channel>:ATTeNuation
<attenuation>
The following command sets the attenuation factor of channel 1 to
100.
CMD$="CI:ATTN 100": CALL IBWRT(SCOPE%,CMD$)
$ 4-channel oscilloscopes only
41
To Next Page
Loading...
