System Commands
|
|
ACQUISITION
DESCRIPTION
COMMAND SYNTAX
QUERY SYNTAX
Response Format
EXAMPLE
BANDWIDTH_LIMIT, BWL
Command/Query
The BANDWIDTH LIMIT command enables or disables the
bandwidth limiting low pass filter.
The response to the BANDWIDTH_LIMIT? query indicates if the
bandwidth filter is on or off.
BandWidth_Limit <mode>
<mode> := {ON, OFF}
BandWidth_Limit?
BandWidth_Limit <mode>
The following command turns the bandwidth filter on.
CMD$ = "BWL ON": CALL IBWRT(SCOPE%,CMD$)
II
II
II
II
II
II
II
Ii
II
II
II
II
II
II
44
II
II
To Next Page
Loading...
