LeCroy 9410 - Page 97

System Commands 5
HARD COPY
HARDCOPY_SETUP, HCSU
Command/Query
DESCRIPTION
The HARDCOPY SETUP command configures the instrument’s
hard copy driver.-The command enables the user to specify the
device type, transmission mode, plot size etc. of the hard-copy
unit connected to the oscilloscope.
The command allows one or more individual settings to be
changed by specifying the appropriate keyword(s) together with
the new value(s). For instance, to select the Graphtec FP5301
plotter with normal speed, the command may be restricted to:
HCSU DEV, FP5301,SPEED,N
Notation
DEV device PORT
port
SPEED plot speed DENS print density
PENS plot pens PFEED page feed
PSIZE paper size GRID grid square
LLX lower left X LLY lower left Y
FP5301
Graphtec FP5301
PM8151 Philips PM8151
HP7470A HP 7470A HP7550A HP 7550A
HPQJ HP QuietJet
HPTJ HP ThinkJet
HPLJ HP Laser Jet EPSON Epson FX80
N Normal NS Non-standard
L Low
COMMAND SYNTAX HardCopy_SetUp DEV,<device>, PORT,<port>
, SPEED,<plotspeed>,
DENS,<print_density>, PENS,<plot._pens>,
PFEED,<page_feed>, PSIZE,<papersize>,
GRID,<grid_square>, LLX,<lowerleft_X>,
LLY,<lower left Y>
Note: Parameters are grouped in pairs. The first one names the
variable to be modified and the second one gives the new value to
be assigned. Pairs may be given in any order and may be restricted
to those variables to be changed.
91