Leica DM2000, Setup
21
Mounting the Spray
Support
The spray support can be mounted on either side of the antenna box.
3.6 Mounting the GPS Support
Mount the GPS
Support
1. Open the locking levers of the spray support.
2. Attach the spray support to the side of the antenna box by first inserting the
upper part and then the lower.
3. Close the locking levers of the spray support.
4. Connect the cable of the spray support to the plug on the antenna box.
5. Insert the spray can into the holder of the support, with the valve facing
downward.
Ensure that the hook of the spray support and the valve of the spray paint
are positioned correctly.
a) Valve
b) Hook
012322_001
1
2
3
4
5
012323_001
a
b
1. Insert the upper part of the GPS support into the holes at the back of the
battery compartment.
2. Attach the lower part of the GPS support at the bottom of the battery
compartment. Use the tightening screws to screw both parts together.
012325_001
1 2
To Next Page
Loading...
Need help?
General
