Leica DM2000, Care and Transport
44
7 Care and Transport
7.1 Transport
Shipping When transporting the product by rail, air or sea, always use the complete original
Leica Geosystems packaging, transport container and cardboard box, or its equivalent,
to protect against shock and vibration.
Shipping, transport
of batteries
When transporting or shipping batteries, the person responsible for the product must
ensure that the applicable national and international rules and regulations are
observed. Before transportation or shipping, contact your local passenger or freight
transport company.
7.2 Storage
Product Respect the temperature limits when storing the equipment, particularly in summer if
the equipment is inside a vehicle. Refer to "8 Technical Data" for information about
temperature limits.
7.3 Cleaning and Drying
WARNING
Risk of electric shock during cleaning and drying
If the product is turned on during cleaning or drying you may receive an electric shock.
Precautions:
• Ensure that all cables are disconnected, including the power supply cable.
• Before cleaning the product, turn off the product and all other devices connected
to the product.
• Ensure that the product is dry before reconnecting cables and turning on the
product.
Product and Acces-
sories
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or soapy water. Do not use other liquids; these may attack the product
surface.
Cables and plugs Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting
cables.
Connectors with
dust caps
Wet connectors must be dry before attaching the dust cap.
To Next Page
Loading...
Need help?
General
