5.4303.8558.0 -
Maintenance 7-3
Preparation
1. Disconnect the main power supply to the charging station.
2. Manually drive the machine to a clean and quiet location.
3. Open the cover of the machine.
4. At the right top corner of the VIOB, push the power button to switch the machine OFF.
5. Close the cover.
Clean
1. Thoroughly clean the charging strips (2) of the machine with sand paper.
2. Thoroughly clean both electrodes (1) of the charging station with a brush or sand paper.
Close-up
1. Connect the charging station to the main power supply.
2. Open the cover of the machine.
3. At the right top corner of the VIOB, push the power button to switch the machine ON.
4. Close the cover.
5. Manually drive the machine to the charging station.
6. Examine the charging electrodes slide over the middle of the charging strips when the machine
connects to the charging station.
7. Put the machine into operation.
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General
