5.4303.8558.0 -
7-4 Maintenance
Figure 25. Clean the charging strips and the charging electrodes
KEY: 1. Charging electrodes - 2. Charging strips
7.3.3 Examine and Clean the Ultrasonic Sensor(s)
Do not use sharp objects to clean the ultrasonic sensor.
Preparation
1. Take the machine out of operation.
2. Manually drive the machine to a clean and quiet location.
Examine and Clean
1. Clean the ultrasonic sensor(s) with a moist cloth.
2. Examine the angle of the ultrasonic sensor(s). If the angle deviates and the brackets of the ultrasonic
sensor(s) are bend or cracked, call your local Lely service provider.
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General
