LELY Juno User Manual

5.4303.8558.0 -
8-2 Troubleshooting
T4C InHerd — Signals App (optional)
When a critical alarm occurs a push notification is sent to the T4C InHerd Signals app too.
To access the alarm notification in the Signals app:
1. Open the Signals app.
2. The alarm is displayed in the signals app at the top of the list.
3. Tap the line of the alarm to read the alarm. In the Lely Control Plus app you can mark the alarm as
solved. In the WiFi configuration screen is displayed if the alarm notification is read in Signals.
8.2 Create a Robot Log
Preparation
1. Take the machine out of operation.
Create Log
1. Tap
.
2. Tap Settings.
3. Tap Logs.
4. Tap Create log.
5. Waiting for log to be created is displayed.
6. The created log is displayed in a green line at the top of the page Robot Logs.
7. Tap the line of the log file.
8. Tap
to download the log file to the smartphone. This can take up to 10 minutes.
9. When it is required, find the log file in the lelycontrolplus folder on the smartphone and send it to your
local Lely service provider.
Close-up
1. Drive the machine to the charging station.
2. Put the machine into operation.
8.3 Troubleshooting Tables
8.3.1 Troubleshooting Table Juno Vehicle
Symptom
Possible cause
Action
The smartphone does not
connect to the machine /
connection lost.
The farmer password is not set
on the smartphone.
1. Ask the Lely service provider
for the password.
The smartphone is not paired
with the machine.
1. Make sure bluetooth of the
smartphone is switched on.
in n o vato rs in agriculture

LELY Juno Specifications

General

Brand	LELY
Model	Juno
Category	Farm Equipment
Language	English