5.4303.8558.0 -
Preface 7
Preface
Manual Contents
This manual contains the information necessary to operate the Juno feed pusher.
The information in this manual is for operators.
Study and understand this information thoroughly before you operate the machine.
Failure to do so could result in damage to equipment or personal injury. Please
consult your local Lely service provider if you do not understand the information in
this manual, or if you need additional information. Store this manual in a safe place
for future reference.
All information in this manual has been compiled with care. Lely shall not be liable for errors or faults in
this manual. The recommendations are meant to serve as guidelines. All instructions, pictures and
specifications in this manual are based on the latest information that was available at the time of
publication. Your machine may comprise improvements, features or options that are not covered in this
manual.
Applicability
The table below shows the machine type numbers for which this manual is applicable.
Model designation
Model
Type number
Juno Feed Pusher with Flex Package
5.4303.0860.X
Juno Feed Pusher
5.4303.0850.X
Standard Torque Loading of Parts
All the nuts, bolts and screws used on the machine are torque tightened to standard torque loadings
applicable to the construction materials used.
If a part has a non-standard torque loading, it is specified in the applicable part of the manual.
Registration
The type and serial number plate of the machine is attached to the mechanism underneath the cover.
Always include the type and serial number of your machine when you contact your local Lely service
provider or when you order spare parts.
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General
