LELY Splendimo 240 MCR - Grease the PTO Shaft; Replace the Gearbox Oil

5.2.3 Grease the PTO shaft
• Requirements:
•
Grease pump
• Biodegradable grease (Total Biomultis SEP2 or equivalent)
1. Use the grease pump to grease the PTO shaft.
2. Grease the profiled tubes of the PTO shaft.
Figure 20. Grease Points PTO Shaft
5.2.4 Replace the Gearbox Oil
• Requirements:
•
Collection container (minimum capacity: 3 liters)
• GX85-W140 transmission oil or equivalent
An incorrect quantity of oil will cause overheating and permanent damage to
the gearbox.
1. Clean the area around the drain plug.
2. Put the collection container underneath gearbox A.
3. Remove the fill plug from gearbox A.
4. Remove the drain plug from gearbox A and allow the oil to flow into the
collection container.
5. When all the oil is out of the gearbox, install the drain plug in gearbox
A.
6. Fill gearbox A with 1.7 l of GX85-W140 transmission oil or equivalent.
7. Install the fill plug in gearbox A.
8. Put the collection container underneath gearbox B.
9. Remove the fill plug from gearbox B.
10. Remove the drain plug from gearbox B and allow the oil to flow into the
collection container.
11. When all the oil is out of the gearbox, install the drain plug in gearbox
B.
12. Fill gearbox B with 0.85 l of GX85-W140 transmission oil or equivalent.
CAUTION
5-4 Maintenance
M-H025.1011EN