Lenovo ThinkServer TD230 - Completing the Parts Replacement

recommendedbythemanufacturer.Ifyoursystemhasamodulecontainingalithiumbattery,replace
itonlywiththesamemoduletypemadebythesamemanufacturer.Thebatterycontainslithiumand
canexplodeifnotproperlyused,handled,ordisposedof.Donot:
•Throworimmerseintowater
•Heattomorethan100°C(212°F)
•Repairordisassemble
Toreplacethesystemboardbattery,dothefollowing:
1.Removeallmediafromthedrivesandturnoffallattacheddevicesandtheserver.Then,disconnectall
powercordsfromelectricaloutletsanddisconnectallcablesthatareconnectedtotheserver.
2.Removetheservercover.See“Removingtheservercover”onpage23.
3.Laytheserveronitssideforeasieroperation.
4.Locatethesystemboardbattery.See“Locatingpartsonthesystemboard”onpage15.
5.Notetheorientationofthesystemboardbatteryandremoveitfromthesocket.
Figure72.Removingthesystemboardbattery
6.Followanyspecialhandlingandinstallationinstructionsthatcamewiththenewsystemboardbattery
andinstallthenewsystemboardbatteryintoitssocket.Makesurethatthebatteryclipsecurely
holdsthebattery.
Note:Notetheorientationofthesystemboardbatterywhenyouinstallitintothesocket.
Figure73.Installingthesystemboardbattery
7.Disposeofthefailingbatteryasrequiredbylocalordinancesorregulations.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage90
.Afteryoureplacethe
systemboardbattery,youmustresetpasswords,systemdateandtime,andreconguretheserver.See
Chapter6“Conguringtheserver”onpage95
.
Completingthepartsreplacement
Thissectionprovidesinstructionstohelpyoucompletethepartsreplacementandturnonyourserver.
90ThinkServerTD230InstallationandUserGuide