Lenovo ThinkServer TD230 - Installing or Removing a PCI Card

7.Pushtheharddiskdrivetoslidethebracketwiththeharddiskdriveintothedrivebayuntilitsnaps
intoposition.
Figure43.Slidingthenon-hot-swapharddiskdriveintothebay
8.Locateanavailableve-wirepowerconnectorandanavailablesignalcableconnector.Then,connect
thepowercableandthesignalcabletotheharddiskdrive.
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage90.Then,youmightneed
tochecktheharddiskdrivestatusLEDstomakesurethattheharddiskdriveisoperatingcorrectly.
Restarttheserverforthenewlyinstalleddrivetoberecognized.IftheamberharddiskdrivestatusLEDis
litcontinuously,thisindicatesthattheharddiskdriveisfaultyandmustbereplaced;ifthegreenharddisk
drivestatusLEDisblinking,thisindicatesthattheharddiskdriveisoperatingcorrectly.
Note:IftheserverisconguredforRAIDoperationusingaRAIDcontroller,youmighthavetorecongure
thediskarraysafteryoureplaceharddiskdrives.
InstallingorremovingaPCIcard
ThissectionprovidesinstructionsonhowtoinstallorremoveaPCIcard.
TheEMIintegrityandcoolingoftheserverareprotectedbyhavingalldrivebaysandPCIcardslotscovered
oroccupied.WhenyouinstalladriveorPCIcard,savetheEMCshieldordrivebayllerfromthedrivebay
orsavethePCIcardslotcoverintheeventthatyoulaterremovethedevice.Anunoccupieddrivebayor
PCIcardslotwithoutcover,shield,ller,oranyotherprotectionmightimpacttheEMIintegrityandcooling
oftheserver,whichmightresultinoverheatingorcomponentdamage.
Chapter5.Installing,removing,orreplacinghardware53