Lenovo ThinkServer TD230 - Removing or Installing the Heat Sink and Fan Assembly

9.ConnecttheminiSASsignalcables(port0toport3)tothecorrespondingSATA/SASsignalconnectors
(connector0toconnector3)onthehot-swapharddiskdrivebackplanes.See“Locatingconnectorson
thehot-swapharddiskdrivebackplanes”onpage18.
Note:EachminiSASsignalcablemighthavealabelattached.Thenumberonthelabelindicates
theportnumber.
Figure56.ConnectingtheminiSASsignalcables
1MiniSASsignalcableconnector04MiniSASsignalcable-port1
2MiniSASsignalcableconnector15MiniSASsignalcable-port2
3MiniSASsignalcable-port06MiniSASsignalcable-port3
Whattodonext:
•Toworkwithanotherpieceofhardware,gototheappropriatesection.
•Tocompletetheinstallation,goto“Completingthepartsreplacement”onpage90.Then,refertoChapter
6“Conguringtheserver”onpage95forinformationaboutRAIDconguration.
Removingorinstallingtheheatsinkandfanassembly
Thissectionprovidesinstructionsonhowtoremoveorinstalltheheatsinkandfanassembly.
Removingtheheatsinkandfanassembly
Attention:
DonotopenyourserverorattemptanyrepairbeforereadingandunderstandingtheSafetyInformationandthe
WarrantyandSupportInformationontheThinkServerDocumentationDVDthatcamewithyourproduct,and
“Guidelines”onpage21
.Toobtainacopyofthepublications,goto:
http://www.lenovo.com/support
Thissectionprovidesinstructionsonhowtoremovetheheatsinkandfanassembly.
Chapter5.Installing,removing,orreplacinghardware71