Lenovo ThinkServer TD230 - Jumper Block Settings

Jumperblocksettings
Thereareseveraljumperblocksonthesystemboardthatcanbeusedtocongure,recover,or
enable/disablespecicfeaturesoftheserversystemboard.Figure9“Jumperblocksonthesystemboard”
onpage17
showsthestatusofthejumperblocksonthesystemboard.
1
2
3
1
2
3
1
2
3
1
2
3
1
2
3
Figure9.Jumperblocksonthesystemboard
Table7.Jumperblocksettings
Jumper
blockPinpositionDescription
Pins1-2
Thesepinsshouldhaveajumperinplacefornormalsystemoperation(default).
1J8B5:
MEForce
Update
Pins2-3
MEforceupdatemodel.
Pins1-2
BMCFirmwareForceUpdateMode–Disabled(default) 2J8C1:
BMCforce
update
Pins2-3
BMCFirmwareForceUpdateMode–Enabled
Pins1-2
Thesepinsshouldhaveajumperinplacefornormalsystemoperation(default).
3J1A1:
BIOS
recovery
Pins2-3
ThemainsystemBIOSwillnotbootwiththesepinsjumpered.Thesystemwillboot
fromabootablerecoverymediawitharecoveryBIOSimage.
Chapter4.Locatingparts,controls,LEDs,andconnectors17